Parts Shop Max FRS / BRZ Solid Sub Frame Riser
Scarles is now the Home of Parts Shop Max!
Get rid of the OEM Rubber bushings that prevent you from getting all of your power to the ground! Help your axle angle and roll center on your lowered car with these CNC bushing replacements.
~ The silver M14 washers are used under the OEM bolt head, 2 in the rear one in the front, when you dont use the gold 5mm topside spacer.
~ Dont use the topside spacer for maximum roll center correction. In this case you need to grind excess metal.
~ If you cant grind your SF and just want solid bushings not Roll Center correction, or your race rules forbid modding the SF, use the topside spacer, and just use one m14 washer under the head of each OEM bolt.
~ Pair these with the diff risers to make your axle joints very happy on your lowered car.
**Install Notes
~ 1. Bushings go in from the botom.
2. The taller pair is for the front and the shorter pair is for the rear.
3. If you want to raise the subframe, you will grind the rear OEM bushing cup flush with the short bushing & you will simply not use the front topside spacer discs.
4. In the raised configuration, you will need two M14 washers are used on each of the rear OEM bolts & one per front bolt so that they dont go too far into the car.