Parts Shop Max GT86 Outer Tie Rods for MAX knuckles with stock LCA
Scarles is now the Home of Parts Shop Max!
This OTR was created for allowing installation of our Super angle/roll center knuckle without the rest of the front end set for entry-level drifters on a budget & grip drivers who are not interested in the additional steering angle the knuckle has to offer.
~ Measures 155mm or 6-1/8" from the joint center to the end which is about 15mm longer then OEM for full thread overlap.
~ The turnbuckle accepts
~45mm of m14p1.5 ITR thread length +
~10mm Jam nut = 56mm or about 2-1/4" ITR thread length desired for maximum ITR thread overlap
~ 6061 aluminum turnbuckle with gold anodizing and laser logos
~ CrMo PTFE lined m14 outer joint (standard misalignment type for the strength of the bearing race thickness)
~ Stainless Steel High misalignment top and bottom spacers adds 8 degrees of range.
~ Correct joint height is achieved with all larger OD spacers under the knuckle and above the joint which is required by our forged roll center/super angle knuckle.
*Not for use with the OEM tapered knuckle OTR mounting hole